Handheld coder part
Mounting brackets and stands for handheld coders
The accessory that most changes what a handheld can do. Held in the hand the print lands where the operator puts it; in a bracket it lands in the same place every time.
Also known as: stand · conveyor mount · fixed bracket · bench stand · clamp mount
Ask for a price on this part
Parts are sold against your machine, not against a picture. Send the model plate and a photograph of the part in place and we confirm the fit in writing before anything is dispatched.
When this is the part that has failed
- Print position varying pack to pack
- An operator tied up doing nothing but coding
- Repetitive strain from long coding runs
- A slow line where packs pass a fixed point
What it is
- Function
- Holds the machine at a fixed height and angle to the pack
- Typical forms
- Bench stand, clamp mount, conveyor-side bracket
- Main benefit
- Repeatable print position, and a free pair of hands
- Not a substitute for
- A true in-line coder above a few thousand packs a day
Does it fit my machine?
Brackets are matched to the machine body and to what you are mounting to, so tell us both: the machine, and whether it is a bench, a conveyor rail or a frame. A photograph of the mounting point saves a round trip.
Replacing it
- 1
Decide bench or line
A bench stand suits short runs and mixed products. A conveyor-side bracket suits one product passing a fixed point. They are different parts.
- 2
Set the height to the print face
The nozzle plate wants to be square to the pack and at a consistent standoff. Set that before you tighten anything.
- 3
Check the travel
The pack still has to move past the head at a steady speed. A bracket fixes the machine, not the feed.
- 4
Lock everything
Vibration walks an unlocked bracket out of position over a shift, and the print drifts with it.
- 5
Run a full batch before you trust it
Check the first and last pack of a real batch, not just the first two.
How we sell parts
- Fit
- Confirmed in writing against your model plate before dispatch
- Invoice
- GST invoice under HSN 8443 32 50 at 18%, against your GSTIN
- Delivery
- Anywhere in India, or free store pickup in Pune
- Bulk
- Quoted directly for resellers and service providers
Frequently asked questions
- Can I mount a handheld coder on my conveyor?
- For low and moderate speeds, yes, and a bracket is much the cheapest way to get repeatable print position. What it does not give you is a true in-line machine: there is no product sensor triggering each print and no line integration. Above a few thousand packs a day on a line that does not stop, you want a fixed in-line coder rather than a handheld in a bracket, and we will tell you so.
- Will a bracket improve my print quality?
- It improves print consistency, which is usually what people mean. Held in the hand, the standoff and the angle change slightly with every pack and every operator; in a bracket they are set once. If your codes are legible but land in a different place on every pack, a bracket is the fix.
Related parts
Handle and housing
The body you actually hold. Easy to dismiss as cosmetic, right up to the point where a cracked housing is what lets solvent reach the board.
Guide roller
The wheel that rides the pack and measures how far the machine has travelled. Everything about print geometry depends on it turning cleanly and staying in contact.
Carry case
Unglamorous, and the reason some machines survive five years of being moved between sites while others arrive cracked. If your machine travels, this is a part rather than an afterthought.
Working across other brands and machine types too? Read the full spare parts guide, which covers continuous inkjet, thermal transfer and laser coders as well.